This natural compound will make the black joints between the tiles white again

### 🧼 Instructions:

1. **Make a paste**: Mix 3 parts baking soda with 1 part water in a small bowl to form a thick paste.

2. **Apply the paste**: Spread it generously over the darkened grout lines using your fingers or a brush.

3. **Spray with vinegar**: Fill a spray bottle with white vinegar and spray directly over the paste. You’ll see it fizz as it begins to lift stains.

4. **Let it sit**: Leave the mixture on the grout for 5–10 minutes to allow it to break down dirt and mold.

5. **Scrub gently**: Using an old toothbrush or grout brush, scrub the grout lines in a circular motion.

6. **Wipe clean**: Wipe away the residue with a damp cloth or sponge. Repeat if needed for stubborn stains.

7. **Rinse and dry**: Give the area a final rinse with clean water and dry it with a clean towel.

—

## Bonus Tips

– For **tough mold** spots, let the baking soda paste sit for 30 minutes before spraying with vinegar.
– To **maintain white grout**, do a quick wipe-down weekly with diluted vinegar or a mild soap solution.
– **Seal your grout** after cleaning to protect it from future staining.

—

## Final Thoughts

No need to reach for harsh bleaches or spend on expensive cleaners. **This natural compound—baking soda and vinegar—can make those blackened joints between your tiles white again** with a little elbow grease and minimal cost. Not only is it effective, but it’s also eco-friendly and safe for homes with pets or children.

So next time you spot dirty grout, don’t panic—grab your baking soda, vinegar, and a brush, and get scrubbing. You’ll be amazed at how quickly your tiles go from grimy to gleaming.

—

Would you like this article in infographic format or shortened for a social media post or video script?